Fater Company; an advisor, designer and administrator of optical fiber projects

Fiber Optic Equipment, FTTH Network & GPON Technology Provider

language flag language flag
(Medium) NET work FOC-M
splice closure
This splice closure is normally with good IP (Ingress Protection) rating thus suitable for outdoor and harsh environment applications.
In-Line splice enclosure is used when the cables needed to be spliced are in a line that is one cable end from the left and the other from the right, this will prevent the bending of the cables when performing the splice.
FOC’s In-line splice enclosures come in various models that are cater to different fiber types like loose tube or ribbon slot fiber cable and also the numbers of fiber core to be spliced. Complete accessories are also included with the enclosure.
• Provides perfect solution for the protection of the junction point of optical fiber cable from environment with Ingress Protection IP 68
• Silicon gasket is used to seal closure and provide a long term reliability
• 2 to 3 cable entrance ports on each end
• Can be installed at temperature between –40ºC ~ +80ºC
• Compact and lightweight
• Easy installation with minimum bolts
Product Type Fiber Optic Splice Closure
Made in: South Korea
Series FOC M
Applications Aerial, Underground, Buried
Number of Inlets and Outlets 2-2 / 2-3 / 3-3
Closure Height 166 mm
Closure Length 450 mm
Closure Width 187 Inch
Weight 5.7 kg
Indoor/Outdoor Outdoor
Maximum Fusion Splice Capacity If using A-1: 144 splices
If using C-1: 288 splices
Maximum Number of Installable Splice 4
Splice tray type Only OST-B-1
Maximum Number of Installable Splice 6
Splice Tray Type A-1 & C-1
Seal Type Gasket